I really like how the two resin pieces have come out. After buffing the surfaces up with 0000 grade wire wool the high points of the surfaces of the forms really stood out with a metallic shine whilst the low points gave the high points further contrast by staying a darker colour. They pieces reflect the light beautifully and I think the form generates by Jupiter and Saturn are one of my personal favourites. Whats is also really nice is how the resin has not only picked up the 3D printing lines but has also developed some pouring marks due to the speed at which I poured the resin (slow), so subtle layers have developed. The only down points is there are some air bubbles. However, this can be avoided next time by making a slightly larger pour hole an possible some air holed for the air to escape properly.